Skip to content

IndexX Wiring Kit

$ USD
  • $ USD
  • € EUR
  • $ CAD
  • $ AUD
  • $ NZD
  • £ GBP
  • ¥ CNY
  • ₹ INR
  • ¥ JPY
  • ƒ ANG
  • kr NOK
  • ₱ PHP
  • R ZAR
  • kr SEK
  • CHF CHF

USD $79.80

IndexX Wiring Kit

Compatible with EZCAD2/ Ezcad3 / LightBurn laser machines – see below for list of compatible laser controllers

The IndexX wiring kit is made for retrofit installation of the IndexX into Ezcad2/Excad3 galvo laser machines. It provides the necessary wiring and connectors to plug in and operate the IndexX with Ezcad2, Ezcad3, or LightBurn.

Includes:

DB9 Wiring Harness (1)
M8 4-pin Panel Connector Harness (1)
GX16 4-pin Panel Connector Harness (1)
Clip-lock splicing connectors (4)
Set of cable ties and mounts (1)
DB15-DB9 Motor Signal Breakout Board (1)
1m blue wire (2)

 

Compatible with the following EZCad2 / LightBurn control boards:

LMCV4-FIBER-M
LMCV4-DIGIT-M
FBLI-B-V4
LMCV4-FIBER*
LMCV4-DIGIT*
LMCV4-SPI*

* additional wiring may be required for controllers with 25pin IO connector

IndexX LMCV4 Wiring Diagram

 

Compatible with the following EZCad3 control boards:

DLC2-M4

IndexX DLC2-M4 Wiring Diagram

 

This item ships FOB from our CHINA warehouse.

Prices exclude import duties and local taxes (VAT / GST).   

Out of stock

Category:

IndexX Wiring Kit

Compatible with EZCAD2/ Ezcad3 / LightBurn laser machines – see below for list of compatible laser controllers

The IndexX Wiring Kit is required for existing laser machines which do not already have the necessary connectors to plug in the IndexX motor or switch cables.

This kit contains the necessary wiring to simplify the retrotfit installation of the additional connectors. The pre-soldered cables and special purpose adaptor board make it easy to install the additional IndexX connections into an existing Ezcad2 / Ezcad3 galvo laser with minimal, or no, modification to the existing wiring of the machine.

This easy-to-install kit does not require any soldering. It includes pre-made DB9 breakout lead, Motor and Limit Switch connectors with leads, snap locking terminals, cable ties and cable tie mounts. It also comes with a special purpose adaptor board for ezcad2 controllers to allow the connectors to be wired in without modification to the existing control board plug of the laser.  Once the wiring kit is installed your galvo laser will be ready to plug in the IndexX using the standard motor cable and switch cable provided with the IndexX.

Cable looms included in the wiring kit are made with long wire lengths to suit a range of laser machine styles. Wires can be cut shorter as required for compact machines. Snap locking connectors are included to join any necessary wires quickly and securely.

Includes:

  • DB9 Wiring Harness (1)
  • M8 4-pin Panel Connector Harness (1)
  • GX16 4-pin Panel Connector Harness (1)
  • Clip-lock splicing connectors (4)
  • Set of cable ties and mounts (1)
  • DB15-DB9 Motor Signal Breakout Board (1)
  • 1m blue wire (2)

 

Compatible with the following control boards:

EZCad2 / LightBurn

LMCV4-FIBER-M
LMCV4-DIGIT-M
FBLI-B-V4
LMCV4-FIBER*
LMCV4-DIGIT*
LMCV4-SPI*

EZCad3 

DLC2-M4

 

*  additional wiring may be required for ezcad2 controllers with the extended 25pin IO connector

 

This item ships FOB from our CHINA warehouse.

Prices exclude import duties and local taxes (VAT / GST).   

Weight0.6 kg
Dimensions23 × 16 × 4 cm

Reviews

There are no reviews yet.

Be the first to review “IndexX Wiring Kit”
AVAILABLE SOON